Mcmurdo NAV6 Betriebsanweisung PDF herunterladen (Seite 41)

Nav6 Plus Navtex System User Guide

INSTALLATION OF DISPLAY UNIT

INSTALLATION OF DISPLAY UNITINSTALLATION OF DISPLAY UNIT

INSTALLATION OF DISPLAY UNIT

• Choose a location that is flat, free from excessive heat and

vibration, and which is convenient for routing the Display Cable.

The display is best viewed when the screen is mounted square

on.

• The Display Unit has been designed for above or below decks

mounting. It can be panel mounted onto a bulkhead, mounted

via a U-bracket (purchased separately as an option) or mounted

on a conversion plate (purchased separately as an option and

intended for use when replacing an existing Nav4 with a Nav6).

• Avoid direct sunlight. If this cannot be avoided then protect the

unit when not in use by purchasing and fitting the optional

suncover.

• The Display Unit should be located at least 0.5metres away from

any transmitting equipment including GPS antennas, VHF

radios, Radar etc.

Surface Mounting the Display Unit

Surface Mounting the Display UnitSurface Mounting the Display Unit

Surface Mounting the Display Unit

You will need: 104mm (4") hole saw

3mm drill for fixing screws.

Phillips head screwdriver.

Follow the instructions:

• Choose a flat surface on which to mount the Display Unit.

• Use the drilling template supplied to mark out the centres for the

104mm hole and the two 3mm holes.

• Drill the holes.

• Remove the two screw covers from the Display Unit.

• Apply a releasing agent (grease or petroleum jelly) to the rubber

seal around the back of the Nav6. This will prevent the seal from

sticking to the bulkhead surface over time.

• Position the Nav6 over the holes and insert the screws.

• Do not over-tighten the screws.

• Clip the screw covers in place.

U-bracket Mounting

U-bracket MountingU-bracket Mounting

U-bracket Mounting

Please follow the fitting instructions contained within the optional U-

bracket mounting kit.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 59 60

Keine Kommentare

Mcmurdo NAV6 Betriebsanweisung Seite 41